ELGI EN07-125 10 HP Rotary Screw Compressor; 38 CFM @ 125 PSIG.Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 10 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.Mounted on 120-Gal. Horizontal Accumulator Tank w/Drain - $ 11,972

ELGI EG22-125 Rotary Screw Air Compressor; 30 HP - 130 CFM @ 125 PSIG30 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty

ELGI EG30-125 Rotary Screw Air Compressor; 40 HP - 170 CFM @ 125 PSIG40 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty

ELGI EG37-125 Rotary Screw Air Compressor; 50 HP - 212 CFM @ 125 PSIGELGi’s Encap series screw compressors are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Specifications: • Horsepower: 50 • Starter: Wye Delta • CFM: 207 • PSIG: 125Standard Features: • 6 Year Airend Warranty • Low Sound Enclosure • Premium Efficiency NEMA motor w/F insulation • TEFC Drive and Fan Motor • High Ambient Oil Cooler for low operating temperature • UL/cUL Certified Control Panel with Wye-Delta Reduced Voltage Starter • Controls & Indications: Microprocessor Controller includes • Maintenance Schedules • Pressure Transmitter • Temperature Transmitter • Auto Restart • Remote Start / Stop • Modulation and Load / Unload Controls • Phase Monitor • DCS Connection through Rtu/RS 485 PortExtended Warranty (Parts and labor):Extended Warranty coverage requires commissioning report submitted within 30 days of the compressor start-up, the use of ELGi replacement parts, adherence to ELGi’s maintenance schedule, testing, and conditions as outlined below. Failure to follow these terms will void the Extended Warranty.Air End:72 months from date of start-up or 78 months from date of shipment from an ELGi warehouse, whichever occurs first.

ELGI EN05-125 7.5 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 26.5 CFM @ 125 PSIG.ELGI's 7.5 HP Rotary Screw Air Compressor wRefrigerated Dryer mounted on a 60 gal. receiver tank.Equipped with: -- 7.5 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start, and the ability to hook up to a RS 485 connection to monitor the system remotely.Includes: -- 60 Gal. receiver tank, 25 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 Volt, 1-Phase option available).Compressor weight approx 860 LbsCompressor dimensions approx 54" x 45" x 58"

ELGI EN07-125 10 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 38 CFM @ 125 PSIG.ELGI's 10 HP Rotary Screw Air Compressor w/20 CFM Refrigerated Dryer mounted on a 120 gal. receiver tank. -- Equipped with: 10 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely. -- Includes: 120 Gal. receiver tank, 40 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.

ELGI EN15-125 20 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 68 CFM @ 125 PSIG.ELGI's 20 HP Rotary Screw Air Compressor w/80 CFM Refrigerated Dryer mounted on a 120 gal. receiver tank.Equipped with: -- 20 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 120 Gal. receiver tank, 80 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.

ELGI EN04-125 5 HP ENCAP Series Rotary Screw Compressor; 19.3 CFM @ 125 PSIG Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 5 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 volt, 1-phase option available).

ELGI EG75-125 Rotary Screw Air Compressor; 100 HP - 453 CFM @ 125 PSIG100 HP Rotary Screw Compressor, 450 CFM @ 125 PSIG(Direct Drive); Air-End equipped with "eta-V" profile rotors. -- Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty.

ELGI EN11-125 Tank Mounted Rotary Screw Compressor w/Refrigerated Dryer, 15 HP - 55 CFM @ 125 PSIGENCAP Series Screw Compressors:120 Gallon Tank Mounted with refrigerated dryer and filters - are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Equipped with & Features: -- 6 Year Airend Warranty -- Low Sound Enclosure -- Premium Efficiency NEMA motor w/F insulation -- TEFC Drive and Fan Motor -- High Ambient Oil Cooler for low operating temperature -- UL/cUL Certified Control Panel -- Controls & Indications: Microprocessor Controller includes -- Maintenance Schedules -- Pressure Transmitter -- Temperature Transmitter -- Auto Restart -- Remote Start / Stop -- Modulation and Load / Unload Controls -- Phase Monitor -- DCS Connection through Rtu/RS 485 Port

ELGI EG22V-125 Rotary Screw Air Compressor; 30 HP VSD - 132 CFM @ 125 PSIG30 HP Rotary Screw VSD (Variable Drive) CompressorEquipped with: -- Low Sound Enclosure -- Premium Efficiency NEMA Motor w/F Insulation -- TEFC Drive and Fan Motor -- Direct Coupled with Flexible Coupling -- High Ambient Oil Cooler for low operating temperature -- UL/cUL Certified Control Panel with Wye-Delta Reduced Voltage StarterMicroprocessor Controller Includes: -- Maintenance Schedules -- Pressure Transmitter -- Temperature Transmitter -- Auto Restart -- Remote Start / Stop -- Load / Unload Controls -- Phase Monitor -- DCS Connection through Rtu/RS 485 PortLIFETIME Air-End Warranty

ELGI EGRD 500 Refrigerated Air Dryer (480 CFM)The ELGi EGRD 500 refrigerated dryer is designed to provide a constant 41ºF dew point and utilizes the latest advancements in refrigeration technology to provide low operating cost and years of trouble-free performance.The advanced “ALU Dry” aluminum heat exchanger module enables the packaging of the pre-cooler, evaporator, separator, and reheater all in one compact unit. This reduces the size, weight and pressure drop associated with conventional exchangers and optimizes the overall performance and reliability of the dryer which ensures effective removal of condensed liquids regardless of flow.Features: -- Microprocessor Controls with Dew Point Display Indication -- All-In-One Aluminum Design Exchanger -- Low-Pressure Drop -- Ozone Friendly Refrigerant -- De-Mister Type Moisture Separator -- Environmentally Friendly Refrigerant -- Hot Gas Bypass for Constant Dew Point -- Extended Service Life -- Timer Drain Options Include: The ELGi Premium Filter Series is constructed from premium materials and features with ease of installation and service in mind. Filter elements have a unique push-fit, double O-ring design to ensure no contaminants get down stream. Features: -- High Quality Aluminum Construction -- Automatic Internal Float Drain -- Pop-up Filter Change IndicatorPrice ...$ 800.00

ELGI AB37V Oil-Free 50 HP Screw Air Compressor with Mikropor Refrigerated Air DryerWith the ELGi AB "Always Better" series, we bring you a disruption in oil free compressed air technology. Every ELGi AB series customer across the world is assured of zero risk of contamination in the compressed air. Our customers are assured of guaranteed emission reduction while ensuring class zero air, free of oil residue, at all times.Specifications: -- Horsepower: 50 -- Working Pressure PSIG: 100-150 -- Outlet Connection: 1-1/2" NPTIncluded: -- Mikropor Refrigerated Air Dryer - MK-US-250 -- 240 Gallon Tank + Kit: -- WaterHog Pneumatic Zero Loss Drain LH50-OLAAWCompressor Equipped with: -- Variable Speed Controls -- Two Stage Air Filtration -- Advanced Neuron III Controller -- Industrial Sound Enclosure -- Robust Cooling System -- Elimination of Oil Cooler with Water Injected Rotor Screws -- Three Stage Water Separation -- Low Operating Temperatures -- FDA Approved SS with Corrosion Protection -- Closed Loop Water Circuit -- Food Grade Approved Anodized Aluminum Housing -- Double Gear Case Design, Both Ends of Screw assembly -- Precision Machined, Hardened, Gear Case Gears. Balanced to ReduceRefrigerated Air Dryer Specifications: -- Air Cooled Refrigerated Compressed Air Treatment Package - With Integral Preand After Filters -- Air Quality ISO 8573.1 Class 1,4,1 Package -- 1-micron Particulate On Board Pre-Filter Included (GKO-US 700MX) -- 0.01-micron Coalescing On Board Post-Filter Included (GKO-US 700MY) -- 250 scfm Rated @ 40°F Dewpoint -- Performance Based on Customer Site Conditions -- Performance Based on 100°F Ambient Temp/100°F Inlet Air Temp/100psig -- 1.8 psi Pressure Drop Across MKUS-250 -- Reduces Air Compressor Energy Operating Costs -- R-134A Refrigerant

ELGI EGRD 300 Refrigerated Air Dryer (300 CFM)The ELGi EGRD 300 refrigerated dryer is designed to provide a constant 41ºF dew point and utilizes the latest advancements in refrigeration technology to provide low operating cost and years of trouble-free performance.The advanced “ALU Dry” aluminum heat exchanger module enables the packaging of the pre-cooler, evaporator, separator, and reheater all in one compact unit. This reduces the size, weight and pressure drop associated with conventional exchangers and optimizes the overall performance and reliability of the dryer which ensures effective removal of condensed liquids regardless of flow.Features: -- Microprocessor Controls with Dew Point Display Indication -- All-In-One Aluminum Design Exchanger -- Low-Pressure Drop -- Ozone Friendly Refrigerant -- De-Mister Type Moisture Separator -- Environmentally Friendly Refrigerant -- Hot Gas Bypass for Constant Dew Point -- Extended Service Life -- Timer Drain Options Include:ELGI Pre-Filter EPFP450 - 500 scfm - 2" NPTThe ELGi Premium Filter Series is constructed from premium materials and features with ease of installation and service in mind. Filter elements have a unique push-fit, double O-ring design to ensure no contaminants get down stream. -- High Quality Aluminum Construction -- Automatic Internal Float Drain -- Pop-up filter change indicatorPrice ...$ 1,150.00ELGI Zero Loss Drain, Model EZL10-110VELGi Electronic Zero Loss Drain, Model EZL10-110V, for compressors up to 500 scfm -- Unique sensor detects all kind of condensate -- High dirt resistance -- Low Maintenance -- Fully automatic -- Saves energyPrice ...$ 325.00

INGERSOLL RAND - UP6-15C-150, ...ROTARY SCREW AIR COMPRESSOR & Horizontal TankSpecifications: -- 15 HP Motor, 55 CFM @ 125 PSI; totally integrated package, single-stage rotary screw air-end; max. modulate pressure 125 PSI. -- Full sound enclosure keeps noise levels below 75 dBA. Standard Features Include: -- Instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control. -- Sealed SSR direct drive gear train; total positive lubrication system with spin-on filter. -- Mounted on horizontal tank.. (28,000) Total operating hours.

INGERSOLL RAND - RS30IE-A125, ...40 HP Screw Compressor40 HP Motor, 196 CFM @ 115 PSI; totally integrated package.Specifications: Single-stage rotary screw air-end; max. modulate pressure 118 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Equipped with: -- Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control System: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. Approx. (23,000) Total operating hours.

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).

MATTEI MNC 0055 Refrigerated Air Dryer (55 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 3/4" NPRT-F Connection; .47 Kw.

MATTEI MNC 0110 Refrigerated Air Dryer (110 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 1" NPRT-F Connection.

MATTEI ERC 1030L, 40 HP Rotary Vane Compressor (154 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 40 HP ODP motor; 154 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.